Electric forklifts are forklifts that operate on electricity, most of which work for batteries. The battery is one of the batteries, its function is to store limited electric energy and use it in a suitable place. It works by putting chemistry
Can be converted into electricity.
Renxian Chengrun Machinery Factory Electric forklift trucks are forklift trucks that operate on electricity. Most of them work for batteries. The battery is one of the batteries, its function is to store limited electric energy and use it in a suitable place. It works by putting chemistry
Can be converted into electricity. There are some technical reasons for choosing an electric forklift. The rapid development of electronic control technology has made the operation of electric forklifts more and more comfortable, the wider the scope of application, and the more and more solutions for logistics. In these respects, the market demand for electric forklifts will certainly grow faster and faster, and the market share of electric forklifts will become larger and larger. This type of battery is also included in the battery of the electric forklift. It should be noted that the battery is best not to be placed horizontally! Because the inside of the battery is generally 22 to 28% dilute sulfuric acid. When the battery is being placed, the electrolyte can flood the plate and leave a little space. If the battery is placed horizontally, some of the electrode plates will be exposed to the air, which is very unfavorable to the battery plate, and the general battery observation hole or The top of the battery has an exhaust port that communicates with the outside world, so the electrolyte is easy to flow out across the battery. Electric forklift forks the goods. The process of picking up the goods by the forklift can be summarized as eight actions. 1. Approaching the goods, after the forklift starts, according to the position of the cargo, the forklift is driven to the front of the cargo to stop. 2, vertical gantry, after the forklift stops, put the shift lever into the neutral, push the tilt lever forward, so that the gantry is restored to the vertical
Straight position.
3. Adjust the fork height, pull the lifting lever backwards, and lift the fork so that the fork tip of the fork is aligned with the cargo clearance or the pallet fork hole. 4. Pick up the fork and hang the shift lever into the first gear. The forklift will drive forward slowly, so that the fork will enter the gap or the fork hole of the pallet. When the fork arm contacts the cargo, the forklift brakes. 5, micro-lift the fork, pull the lift lever backwards, so that the fork rises to the height of the forklift can leave the operation. 6. After tilting the gantry, pull the tilt lever backwards to tilt the gantry back to the extreme position. 7. Exit the cargo position, hang the shift lever and then reverse it to relieve the brakes. The forklift will retreat to the position where the cargo can fall.
8. Adjust the fork height, push the lift lever forward, and lower the fork to a height of 200-300mm from the ground. Start backwards and head to the delivery location. The operator must strictly follow the required pick-up process. Operator safety issues, human operations are a safety hazard,
No matter what, personal safety is always in the first place!
Renxian Chengrun Machinery Factory 8. Adjust the fork height, push the lift lever forward, and lower the fork to the height of 200-300mm from the ground. Start backwards and head to the delivery location. The operator must strictly follow the required pick-up process. Operator safety issues, human operations are a safety hazard,
No matter what, personal safety is always in the first place! The above is the working principle and use method of electric forklift machine. If you want to know more about electric forklift, or want to buy a high-quality electric forklift, welcome to consult, Chengrun Machinery will serve you wholeheartedly.
Pre：Research on Modeling and Steering Stability Control of Four-wheel Steering Electric Forklift
Next：What is the reason why the forklift can't walk and how to repair it?
