Friends who are familiar with forklifts may know that the assembly is a series of parts or products that make up a whole that fulfills a particular function. The general term for this system is the assembly. Today, Xiaobian will introduce you how to replace the friction plate assembly.
1. First step on the clutch pedal to disengage the friction plate.
2. Turn the upper end of the gearbox to slide the screw counterclockwise to retract the drive shaft into the gearbox.
3. Remove the pressure plate shell bolts to disengage them from the flywheel and remove the old friction plate assembly.
4. Into the new friction plate assembly, it should be noted that the friction plate hub spline sleeve extends the longer end toward the side of the gearbox.
5. Turn the sliding screw clockwise to gradually pull the active bearing out and insert it into the spline hole of the friction plate hub.
6. When it is judged that the drive shaft has actually entered the intermediate bearing of the flywheel, then lock the sliding screw and tighten the torque.
7. Install the platen housing onto the flywheel.
8. It is also necessary to adjust the clutch pedal stroke.
The above is the method of replacing the friction plate assembly with the forklift. I hope to help you solve the problem.
Pre：Inspection and repair of forklift starter casing and magnetic pole
Next：Construction machinery maintenance 10 "no", who did it?
