The safety management regulations for forklifts include: checking the vehicle, starting, driving, loading and unloading. What is the specific situation? What are the safety management regulations?
First: Check the vehicle: 1. Before the forklift is in operation, check the appearance, add fuel, lubricating oil and cooling water.
2. Check starting, running and braking performance.
(1) Check whether the lighting and sound signals are complete and effective
(2) Check if the pressure and temperature are normal during the operation of the forklift.
(3) The forklift should also be inspected before operation.
Second: start
1. Before starting, observing the surrounding area, and confirming that there are no obstacles to the safety of driving, start the whistle and start.
2. The forklift is at the start of the load. The driver should confirm that the contents are stable and reliable.
3. Start slowly and smoothly at the start.
Third: driving
1. The height of the bottom end of the fork should be maintained at 300-400MM when driving.
2. Do not raise the fork too high when driving. When entering or leaving the job site or on the road, pay attention to the obstacles in the sky. When the load is driving, if the fork rises too high, it will increase the overall center of gravity of the forklift and affect the stability of the forklift.
3. After unloading, the fork should be lowered to the normal driving position before driving.
4. When turning, if there are pedestrians or vehicles attached, it should send a signal and prohibit high-speed sharp turns. High-speed sharp turns will cause the vehicle to lose lateral stability and tip over.
5. The internal combustion forklift is prohibited from stalling when it goes downhill.
6. It is forbidden to brake the load while driving in non-special circumstances.
7. When the forklift is running, it must obey the traffic rules in the field and must maintain a certain safe distance from the preceding vehicles.
8. When the forklift is running, the load must be at the lowest dimension that does not hinder the driving. In addition to being sinister,
9 It is forbidden to turn on the ramp and not to cross the ramp.
Edited and offered by Shanghai Saferlifts Machieny Co., Ltd.
Pre：Wrong operation of forklift maybe cause death which should be avoid
Next：Forklift management regulations
