1. When loading the goods, adjust the distance between the two forks as needed to balance the load of the two forks, and do not deflect. One side of the item should be placed against the rack.
2. Do not use single forks or forks or pulls. In special circumstances, a safety warning sign must be set up to remind pedestrians around.
3. The brake must be braked with the brakes during loading and unloading of the item.
4. The speed of the car should be slow and steady. Pay attention to the wheels and do not crush the items, so as not to cause the wounds to hurt.
5. When using forks, the fork should be forked as far as possible into the load, and the fork tip should not touch other goods or objects. The minimum gantry back tilt should be used to stabilize the load so as not to slide backwards after the load. When the load is lowered, the gantry can be tilted forward a small amount to facilitate loading and unloading the fork.
6. It is forbidden to fork the cargo at high speed and collide with a hard object with a fork.
7. When the forklift forks work, it is forbidden to stand around the forks to prevent the goods from collapsing and injuring people.
8. It is forbidden to overload, and it is forbidden to use the forklift to lift personnel to work in high places, so as to avoid high-altitude falling accidents.
9. It is not allowed to brake with inertial slip, release, round or easy rolling items.
10. It is not allowed to use the fork to pick and turn the pallet to unload the goods.
Pre：Forklift safety requirements
Next：Daily maintenance of forklift
