2.0t Forklift with Isuzu Engine and side shift and 3stages

MONOTROLTM single pedal controls forward, reverse, and acceleration, increasing work efficiency by approximately 30%;
Engine exhaust emissions meet Tier2 (Europe 2) standards;
The fully isolated power chain design completely isolates the engine and transmission system from the frame and drive shaft. The vibration of the engine is not transmitted to the gantry, frame and cab, effectively preventing the vibration of the engine from being transmitted to the gantry. The car body and the cab reduce the vibration of the gantry and protect the cargo on the fork. At the same time, the fatigue of the driver is greatly reduced by reducing the vibration and noise during operation;
Extra wide gantry for superior driver visibility and improved safety;
Powerful control panel, the driver monitors the operation of the forklift;
The engine oil change interval is long, reaching 500 working hours, reducing the maintenance cost of the forklift.

1	Model			UNIT	DF20	DF20	DF25	DF25
2	Power				Diesel
3	capacity			kg	2000	2000	2500	2500
4	Load center			mm	500	500	500	500
5	Lift height			mm	3000	3000	3000	3000
6	Free lift height			mm	110	110	110	110
7	Fork size			mm	1070×120×40	1070×120×40	1070×120×40	1070×120×40
8	Fork outside spread(Min./Max.)			mm	245/1030	245/1030	245/1030	245/1030
9	Mast tilt range(F/R)			deg	6/12	6/12	6/12	6/12
10	Front overhang			mm	480	480	480	480
11	Overall dimensions	Length to face of fork	Without of fork	mm	2500	2500	2570	2570
12			With fork	mm	2540	2540	2610	2610
13			Wheel width	mm	1160	1160	1160	1160
14		Mast lowered height		mm	2050	2050	2050	2050
15		Mast extended height		mm	4000	4000	4000	4000
16		Overhead guard height		mm	2150	2150	2150	2150
17	Turning radius			mm	2320	2320	2380	2380
18	Min. right angle aisle width			mm	1910	1910	2000	2000
19	Travel speed (unload/full load)			km/h	20/18.5	20/18.5	20/18.5	20/18.5
20	Lift speed (unload/ full load)			mm/s	510/450	510/450	510/450	510/450
21	Max. gradeability			%	20	20	20	20
22	Tires		Front		7.00-12-12PR	7.00-12-12PR	7.00-12-12PR	7.00-12-12PR
23			Rear		6.00-9-10PR	6.00-9-10PR	6.00-9-10PR	6.00-9-10PR
24	Tread		Front	mm	970	970	970	970
25			Rear	mm	980	980	980	980
26	Wheelbase			mm	1650	1650	1650	1650
27	Min. ground clearance (unload/ full load)		Mast	mm	160/140	160/140	160/140	160/140
28			Frame	mm	150/130	150/130	150/130	150/130
29	Battery			v/ah	12/90	12/90	12/90	12/90
30	Engine		Model		C240	490BPG	C240	490BPG
31			Rated output	kw/r.p.m	35.4/2500	40/2650	35.4/2500	40/2650
32			Rated torque	n.m/r.p.m	139/1800	148/1800	139/1800	148/1800
33			Displacement	cc	2369	2540	2369	2540
34			No. of cylinder		4	4	4	4
35			Bore×stroke	mm	90×100	90×100	90×100	90×100
36	Transmission		Model		Hydraulic	Hydraulic	Hydraulic	Hydraulic
37			Shift (FWD/RVS)		1/1	2/2	1/1	2/2
38	Operating pressure			mpa	17.5	17.5	17.5	17.5